Chicken wing wood microwave vacuum dryer price
The chicken wing wood microwave vacuum dryer is used to dry the precious wood chicken wing wood. After drying, the use of the chicken wing wood is increased by 5%, and the water content after drying is less than 10%. Since the price of wood is expensive, the price is calculated by weight, and the drying quality is required to be high. The process of drying chicken wings wood with chicken wing wood microwave vacuum dryer is divided into three stages: early rapid heating section - constant temperature section - heating section - heat preservation section - cooling section, using touch screen, PLC control, temperature can be set in stages, microwave drying power It can be adjusted automatically according to the drying temperature, the drying temperature is below 55 degrees, and the water content is less than 22%. The drying time of the chicken wing wood is only 12 hours. Since the drying temperature of the vacuum chicken wing wood drying equipment is low, the chicken wing wood does not crack, does not break, and does not deform after drying. The chicken wing wood microwave vacuum drying equipment has low drying cost, 300 cubic meters of electricity for drying one cube, and trolley type for loading.
Chicken wing wood microwave vacuum dryer can be used for drying and drying of chicken wing wood board, chicken wing wood square, chicken wing wood furniture parts, rosewood, rosewood, ebony, ebony.
This microwave equipment is non-standard, and the price will vary depending on the material and power. To find out the price, consult an online engineer immediately.
Musical instrument wood vacuum drying equipment, mahogany microwave vacuum drying equipment Sichuan Xingyun Musical Instrument Factory was founded in 1995, located in Xinxing Town, High-tech Zone, Chengdu, Sichuan Province. Covering an area of 8 acres, the factory area is about 4,000 square meters. The company's main products are: 琵琶, Guzheng, Zhongmu, Liuqin, Erhu and other national musical instruments. It is an enterprise integrating the production, sales and maintenance of musical instruments.
Due to the high quality requirements of the wood for musical instruments, the water content after drying is less than 8%, and the requirements for wood deformation and cracking are very high. The company purchases a wood microwave vacuum dryer from our company, which can dry 1.5 cubic meters at a time. The wood is fully compliant with the wood processing requirements of the plant.
The old root family has a root carving craft production area of 10,000 square meters. There are more than 100 craftsmen with root carving craftsmanship. The root carving art works are exported to Taiwan, Hong Kong, Macao and the world. It is a famous large-scale root carving technology company in Fujian Province. The root carving crafts and the office tables and chairs of the series are unique and lifelike. They are very environmentally friendly and enjoy the value. The pieces are very in love.
The company ordered a mahogany microwave drying kiln from our company to dry all kinds of root carving wood. The drying capacity is 2 squares. It is a combination of microwave and hot air. It belongs to atmospheric drying equipment, linear adjustment of temperature and humidity, and timing switch. Function, as well as wood humidity, dryness alarm and other functions.
Business Consulting Tel: 18022248830, 020-39232099.
After sales service
1. Quality assurance system:
According to the national GB10436-89 mandatory requirements: microwave leakage ≤ 5mw / cm2, our company microwave leakage guarantee ≤ 2mw / cm2.
2. Quality warranty period:
The free shelf life of Zhiya microwave equipment is 12 months from the date of completion of the equipment manufacturing and passing the commissioning. After the expiration, the whole service will be tracked.
3. Service commitment:
□ During the installation of the equipment, the staff will be assisted free of charge.
□ On-site commissioning: After the equipment is installed, if the peripheral conditions such as water and electricity are already available, it is responsible for dispatching the equipment to debug the equipment to achieve the best operating condition.
□ Operational training: On-site training of microwave equipment operation and technical training and basic maintenance operations. During the warranty period, irregular monthly return visits will prevent and eliminate potential hazards.
□ Emergency services: After receiving emergency service requests from users, the company has a special sales and service center to provide 24-hour service for customers. Service objectives: prompt and timely, warm and thoughtful. After receiving the repair call, the customer responded within 12 hours according to the customer's address and arrived at the scene within 48 hours. Regular accessories are available within 24 hours and special accessories are available within 48 hours.
□ Regular service: 100% return visit rate for customers beyond the warranty period, 100% petition and telephone access rate, and product lifetime tracking service.
4. Status of spare parts:
The factory has ample spare parts and spare parts, which can provide users with pure quality and uniform price. Spare parts are provided at random.
5. Training plan:
There is a user training base in the factory, and there are training materials prepared by professionals, free training and free consultation. Theoretical training content: basic knowledge of microwave equipment operation; microwave equipment structure and system knowledge; cooling waterway oil circuit management; electrical basic knowledge; microwave equipment operation and maintenance knowledge.
On-site training content: structure description of main equipment, operational performance introduction, specific operation procedure exercises, maintenance and repair procedure exercises, on-site training to enable the user's operators to operate independently and handle simple faults. Microwave equipment operators technical training courses are held regularly every year.
Fixed service hotline:
020-39232099 39232082 39232083
Corresponding parameter set not found, please add it in property template of background
1, power requirements: three-phase five-wire 380V ± 10% 50Hz ± 1%
2, power rating rated input power: ≤ 50KVA
3. Ambient temperature: 5~40°C Relative humidity: ≤90%
4, microwave operating frequency: 2450 ± 50MHz
5, microwave output power: 31.5KW (power segmentation adjustable)
6. Microwave feeding part: the side of the cavity is fed. Minimum isolation between feed ports: greater than 20db
7, microwave feed standing wave ratio: less than 2 (under rated load)
8, microwave magnetron: Samsung magnetron.
9, microwave system cooling method: magnetron (air cooling), transformer (air cooling).
10, magnetron service life: more than 8000 hours
Scan QR code to view with phone
Microwave vacuum drying equipment
No content information display available
Please add data record on website background.